AI News, Robotics/Computer Control/The Interface/Microcontrollers
- On Thursday, October 4, 2018
- By Read More
Robotics/Computer Control/The Interface/Microcontrollers
Microcontrollers are low level devices and it is common to program them using an assembly language, this provides a great deal of control over the hardware connected to the controller.
microcontroller is a kind of microprocessor, because it includes a CPU, but it typically also contains all of the following components on the same single chip:
If you wanted to change that software, you would have to pull out the ROM chip, program a new ROM chip (in a 'chip programmer'), and then plug the new chip into the PC.
They can be rewritten with new data, like a memory chip, but permanently, and only a certain number of times (10,000 to 100,000 erase/write cycles).
- On Wednesday, September 18, 2019
Simple Firmware Extraction w/ Device Programmer
Here's a simple demonstration of extracting firmware from a Microchip PIC using a Xeltek general purpose device programmer. The resultant binary is then ...
Assembly and Review - PE6502 Hobby Computer
Support this channel on Patreon Visit my website for cool gear: For more information on the .
Ad-Lib Sound Card for the Parallel Port
Support this channel on Patreon: Buy the OPL2LPT here: Europe: North America: .
Replica Sound Cards - AdLib, Innovation SSI-2001, and SwinSID Ultimate.
Support this channel on Patreon: Visit my website:
DEF CON 21 - Panel - Hardware Hacking with Microcontrollers
Hardware Hacking with Microcontrollers: A Panel Discussion JOE GRAND MARK 'SMITTY' SMITH LOST RENDERMAN FIRMWAREZ Microcontrollers and ...
Changing a Program Chip
Visual guide to changing an EPROM chip in a processor circuit board.
Google I/O 2012 - ADK 2.0
Dmitry Grinberg, Travis Geiselbrecht, Eric Schlaephfer Introducing the new APIs and capabilities in ADK 2.0, with demos. For all I/O 2012 sessions, go to ...
Arduino DC Motor Control Tutorial
In this experiment an Arduino controls the voltage on the gate of a Power MOSFET that turns an inductive motor on and off. I'm using a Power MOSFET IRF520.
Laser XT Restoration
Support this channel on Patreon: Visit my website for cool merchandise: In this episode I take two .
Mac Mini Core Duo - How to disassemble and upgrade Memory and Hard Drive A1176
This video shows how to upgrade the RAM and Hard Drive on the A1176 Mac Mini Core Duo and Core-2 Duo Models. If you have a Mac Mini G4, use the ...